Monitoring The Vrf - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

Related Topics

Monitoring the VRF

Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
Table 97: show ip route Output Fields (continued)
Field Name
Intf
show ip route
Display information about the VRFs in this virtual router: the route target of each VRF
and the interfaces attached to each VRF.
To display all VRFs in this virtual router:
host1#show ip vrf
VRF Name Default RD
vpn1 1:1
vpn2 1:3
To display brief information about a specified VRF, specify a VRF name:
host1#show ip vrf vpn1
VRF Name Default RD
vpn1 1:1
To display detailed information about a specified VRF:
host1:pe1#show ip vrf detail
VRF pe11; Default RD 100:11
VRF IP Router Id: 10.11.11.1
Default TTL: 127
Reassemble Timeout: 30
Interface Configured:
null0 ATM2/0.11 tun mpls:vpnEgL17-3
Import VPN Route Target Extended Communities:
100:1
Export VPN Route Target Extended Communities:
100:1
IPv4 Import Route-map: my-v4-import-map
IPv6 Import Route-map: my-v6-import-map
IPv4 Export Route-map: my-v4-export-map (can not filter routes)
IPv6 Export Route-map: my-v6-export-map (can filter routes)
IPv4 Global Import Route-map: my-v4-global-import-map (max routes 5000)
IPv6 Global Import Route-map: my-v6-global-import-map (max routes 1000)
IPv4 Global Export Route-map: my-global-v4-export-map
IPv6 Global Export Route-map: my-global-v6-export-map
VRF pe12; Default RD 100:12
VRF IP Router Id: 10.12.12.1
Default TTL: 127
Reassemble Timeout: 30
Interface Configured:
null0 ATM2/0.12 tun mpls:vpnEgL18-4
Import VPN Route Target Extended Communities:
100:2
Field Description
Outgoing interface to reach route
Interfaces
null0
atm4/0.77
null0
fastEthernet3/0
atm4/0.21
Interfaces
null0
atm4/0.77
ip dyn-24
ip dyn-25
Chapter 7: Monitoring BGP/MPLS VPNs
497