Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual page 372

JunosE 11.2.x BGP and MPLS Configuration Guide
336
Table 67: show ldp interface Output Fields (continued)
Field Name
Link hello adjacency
label alloc
label learned
accum label alloc
accum label learned
last restart time
notf
msg
mapping
request
abort
release
withdraw
addr
addr withdraw
msgId
unknown msg type err
hello recv
hello sent
bad hello recv
adj setup time
Field Description
Address and transport address of the link hello adjacency; time
adjacency has been up in hh:mm:ss; remaining hold time for the
adjacency in seconds
Number of labels allocated and advertised to this peer
Number of labels received from this peer
Cumulative total number of labels allocated and advertised to this
peer
Cumulative total number of labels received from this peer
Time in hh:mm:ss since session last restarted
Number of notification messages received or received bad or sent
Number of messages received or received bad or sent
Number of label mapping messages received or received bad or
sent
Number of label request messages received or received bad or sent
Number of label abort messages received or received bad or sent
Number of label release messages received or received bad or sent
Number of label withdraw messages received or received bad or
sent
Number of address messages received or received bad or sent
Number of address withdraw messages received or received bad
or sent
Number of message ID messages received or sent
Number of unknown message type errors received
Number of hello messages received
Number of hello messages sent
Number of hello messages received bad
Time in hh:mm:ss since adjacency set up
Copyright © 2010, Juniper Networks, Inc.