Monitoring Vpws Connections - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

JunosE 11.2.x BGP and MPLS Configuration Guide
Related Topics

Monitoring VPWS Connections

Purpose
Action
host1:pe1# show l2vpn connections details
L2VPN: l2vpn1
Encapsulation Type Ethernet
Use of control word is preferred
Send sequence numbers
Route Distinguisher 100:11
Site Range 10
Sites:
Site Name westford Site Id 1
Multi-homed:
Site-Priority:
Route Target: RT:100:1 both
Interface Local-Site-Id
--------------- -------------
FastEthernet4/1 1
Connections status code:
UP = Operational
SC = Local and Remote Site Identifier Collision
EM = Encapsulation Mismatch
OR = Out of Range
670
Table 138: show ip bgp l2vpn all next-hops Output Fields (continued)
Field Name
IP indirect next-hop index
MPLS indirect next-hop
index
Reachable
metric
Number of direct next-hops
Direct next-hop
Reference count
show ip bgp next-hops
Display configuration and status information for VPWS L2VPN connections configured
on the router. The details keyword displays detailed information about the connections.
To display detailed information about connections for all VPWS instances configured
on the router:
Yes
45 Route Targets:
Remote-Site-Id
--------------
2
Field Description
Index number of the IP indirect next hop that corresponds to the
BGP indirect next hop and its resolution
Index number of the MPLS indirect next hop that corresponds to
the BGP indirect next hop and its resolution
Indicates whether or not the indirect next hop is reachable. For more
information about the reachability rules that apply for various route
types, see the command description for show ip bgp next-hops.
Metric number of the BGP indirect next hop
Number of the equal-cost legs of direct next hops to which this
indirect next hop resolves
MPLS next-hop index that resolves the MPLS indirect next hop
Number of label mappings of BGP routes that use this next hop
Admin Oper
state state
------- -----
enabled up
Copyright © 2010, Juniper Networks, Inc.