Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual page 534

For e series broadband services routers - bgp and mpls configuration
Table of Contents

Advertisement

JunosE 11.2.x BGP and MPLS Configuration Guide
498
Export VPN Route Target Extended Communities:
100:2
Import Route-map : importmap1
Export Route-map : exportmap23 (can filter routes)
Global Import Route-map : globalimportmap2
Global Export Route-map : globalexportmap3
VRF
pe13; Default RD 100:13
VRF IP Router Id: 10.13.13.1
Default TTL: 127
Reassemble Timeout: 30
Interface Configured:
null0
ATM2/0.13 tun mpls:vpnEgL19-5 ip dyn-26
Import VPN Route Target Extended Communities:
100:3
Export VPN Route Target Extended Communities:
100:3
No Import Route-map
No Export Route-map
No Global Import Route-map
No Global Export Route-map
To display summary information about all interfaces associated with all VRFs configured
in a virtual router:
host1:PE1#show ip vrf interfaces
Interface
IP-Address
null0
255.255.255.255/32
atm4/0.134
4.4.4.2/24
null0
255.255.255.255/32
ip0
6.6.6.8/24
null0
255.255.255.255/32
loopback1
7.7.7.2/24
To display detailed information about the interfaces:
host1:PE1#show ip vrf interfaces detail
null0 is up, line protocol is up
VRF: pe11
Link up/down trap is disabled
Internet address is 255.255.255.255/255.255.255.255
IP statistics:
Rcvd:
0 local destination
0 hdr errors, 0 addr errors
0 unkn proto, 0 discards
Frags: 0 reasm ok, 0 reasm req, 0 reasm fails
0 frag ok, 0 frag creates, 0 frag fails
Sent:
0 generated, 0 no routes, 0 discards
ICMP statistics:
Rcvd:
0 errors, 0 dst unreach, 0 time exceed
0 param probs, 0 src quench, 0 redirect,
0 echo req, 0 echo rpy
0 timestmp req, 0 timestmp rpy
0 addr mask req, 0 addr mask rpy
Sent:
0 errors, 0 dst unreach, 0 time excd
0 param probs, 0 src qnch, 0 redirect
0 timestamp req, 0 timestamp rpy
0 addr mask req, 0 addr mask rpy
atm4/0.134 is up, line protocol is up
VRF: pe11
Link up/down trap is disabled
Internet address is 4.4.4.2/255.255.255.0
IP statistics:
Rcvd:
0 local destination
Status Protocol
VRF
up
up
pe11
up
up
pe11
up
up
pe12
up
up
pe12
up
up
pe13
up
up
pe13
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.2.x

Table of Contents