Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual page 200

JunosE 11.2.x BGP and MPLS Configuration Guide
164
host1:pe1#show ip bgp route-target signaling
Local BGP identifier 13.13.13.13, local AS 100
4 routes (240 bytes)
3 destinations (228 bytes) of which 3 have a route
3 routes selected for route tables installation
0 unicast/multicast routes selected for route table installation
0 unicast/multicast tunnel-usable routes selected for route table installation
0 tunnel-only routes selected for tunnel-route table installation
10 path attribute entries (1520 bytes)
Local-RIB version 19. FIB version 19.
Status codes: > best, * invalid, s suppressed, d dampened, r rejected,
a auto-summarized
Prefix Peer
> 0:0:0/0 12.12.12.12
> 100:100:1/96 11.11.11.11
100:100:1/96 14.14.14.14
> 100:100:2/96 11.11.11.11
To display information about routes in the route-target address family corresponding to
the specified RT-MEM-NLRI:
host1:pe1#show ip bgp route-target signaling 100:100:1/96
BGP route information for prefix 100:100:1/96
Received route learned from internal peer 11.11.11.11 (best route)
Route not placed in IP forwarding table
Best to advertise to both internal and external peers
Address Family Identifier (AFI) is ip-v4
Subsequent Address Family Identifier (SAFI) is route-target-signaling
Next hop IP address is 11.11.11.11 (metric 0)
Multi-exit discriminator is not present
Local preference is 100
Weight is 0
Origin is IGP
AS path is empty
Received route learned from internal peer 14.14.14.14
Route not placed in IP forwarding table
Do not advertise to any peers
Address Family Identifier (AFI) is ip-v4
Subsequent Address Family Identifier (SAFI) is route-target-signaling
Next hop IP address is 14.14.14.14 (metric 0)
Multi-exit discriminator is not present
Local preference is 100
Weight is 0
Origin is IGP
AS path is empty
To display information about network routes in the route-target address family:
host1:pe1#show ip bgp route-target signaling network
Prefix Weight Route-map
102:111:34/96
1111111111:23:1/96
To display information about network routes in the route-target address family
corresponding to the specified RT-MEM-NLRI:
host1:pe1#show ip bgp route-target signaling network 102:111:34
Prefix Weight Route-map
102:111:34/96
To display filtered information about all networks in the BGP routing table:
host1:pe1#show ip bgp fields peer next-hop next-hop-cost
Prefix Peer
Next-hop MED LocPrf Weight Origin
12.12.12.12
11.11.11.11
14.14.14.14
11.11.11.11
Next-hop Next-hop-cost
Copyright © 2010, Juniper Networks, Inc.
100 0 IGP
100 0 IGP
100 0 IGP
100 0 IGP
Backdoor
No
No
Backdoor
No