Monitoring Mpls Minor Interfaces - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

JunosE 11.2.x BGP and MPLS Configuration Guide
Related Topics

Monitoring MPLS Minor Interfaces

Purpose
Action
354
Table 76: show mpls interface Output Fields (continued)
Field Name
hello recv
hello sent
hello rej
adj setup
adj deleted
show mpls interface
Display status and configuration information about MPLS minor interfaces.
The show mpls interface minor command displays the same information.
To display information about MPLS minor interfaces:
host1:pe1#show mpls minor-interface
MPLS minor interface pe1-to-pe2 (transmit)
Stacked on MPLS major ATM2/0.10
Operational state is up
Sent:
0 packets
0 bytes
queue 0: traffic class best-effort, bound to atm-vc ATM2/0.10
Queue length 0 bytes
Forwarded packets 0, bytes 0
Dropped committed packets 0, bytes 0
Dropped conformed packets 0, bytes 0
Dropped exceeded packets 0, bytes 0
MPLS minor interface lsp-02020202-1-4 (receive)
Stacked on MPLS major ATM2/0.10
Operational state is up
Statistics not enabled for this interface
To display detailed information about MPLS minor interfaces:
host1:pe1#show mpls minor-interface detail
MPLS minor interface pe1-to-pe2 (transmit)
Stacked on MPLS major ATM2/0.10
Operational state is up
MPLS minor interface UID is 0x1a000001
Lower MPLS major interface UID is 0x19000001
Sent:
0 packets
0 bytes
queue 0: traffic class best-effort, bound to atm-vc ATM2/0.10
Queue length 0 bytes
Forwarded packets 0, bytes 0
Field Description
Number of hello messages received
Number of hello messages sent
Number of hello messages rejected
Number of adjacencies set up
Number of adjacencies deleted
Copyright © 2010, Juniper Networks, Inc.