Monitoring Bgp Community Routes In The Community List; Table 30: Show Ip Bgp Community-List Output Fields - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

For e series broadband services routers - bgp and mpls configuration
Table of Contents

Advertisement

Monitoring BGP Community Routes in the Community List

Purpose
Action
Meaning
Copyright © 2010, Juniper Networks, Inc.
Display all routes that are members of communities on the specified BGP community
list. Report whether the indirect next hop of a route is unreachable; if not, display the IGP
cost to the indirect next hop. Accepts regular expressions.
The show ip bgp community-list and show bgp ipv6 community-list commands display
similar information.
To display all routes that are members of communities in the specified BGP community
list:
host1#show ip bgp community-list 1 fields peer communities
Local router ID 192.168.1.153, local AS 100
72077 paths, 72077 distinct prefixes (5189544 bytes used)
72077 paths selected for route table installation
21627 path attribute entries (2957324 bytes used)
Prefix
Peer
3.0.0.0/8
10.5.0.48
4.0.0.0/8
10.5.0.48
4.17.106.0/24
10.5.0.48
4.17.115.0/24
10.5.0.48
6.0.0.0/8
10.5.0.48
9.2.0.0/16
10.5.0.48
9.20.0.0/17
10.5.0.48
12.0.0.0/8
10.5.0.48
Table 30 on page 173 lists the show ip bgp community-list command output fields.

Table 30: show ip bgp community-list Output Fields

Field Name
Local router ID
local AS
routes
paths
distinct prefixes
paths selected for route
table installation
Communities
777:777 888:888
777:777 888:888
777:777 888:888
777:777 888:888
777:777 888:888
777:777 888:888
777:777 888:888
777:777 888:888
Field Description
BGP router ID of the local router
Local autonomous system number
Total number of routes stored in the BGP routing table and amount
of memory consumed by routes. If several peers have advertised a
route to the same prefix, all routes are included in this count.
Total number of routes stored in the BGP routing table. If several
peers have advertised a route to the same prefix, all routes are
included in this count.
Number of routes to unique prefixes stored in the BGP routing table.
If several peers have advertised a route to the same prefix, only the
best route is included in this count.
Number of routes in the BGP routing table that have been inserted
into the IP routing table
Chapter 2: Monitoring BGP
173

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.2.x

Table of Contents