Monitoring L2Vpn Interfaces For Vpws - Juniper JUNOSE 11.2.X BGP AND MPLS Configuration Manual

For e series broadband services routers - bgp and mpls configuration
Table of Contents

Advertisement

Related Topics

Monitoring L2VPN Interfaces for VPWS

Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
Table 140: show l2vpn instance Output Fields (continued)
Field Name
Route Distinguisher
Site Range
Sites
Multi-homed
Site-Priority
Route Targets
Interface
Local-Site-Id
Remote-Site-Id
Admin state
Oper state
show l2vpn instance
Display configuration and status information for interfaces on the router that are that
are configured to be members of VPWS L2VPNs in the current VR. You can display
information for a specific L2VPN interface, for all L2VPN interfaces in the specified VPWS
instance, or for all L2VPN interfaces in all VPWS instances. The detail keyword displays
detailed information about the specified L2VPN interface or all L2VPN interfaces.
To display L2VPN interface information for a particular VPWS instance:
host1#show l2vpn interface instance l2vpn1
MPLS shim interface ATM2/0.100
ATM circuit type is AAL5
Member of L2VPN instance l2vpn1
Local site ID is 1
Remote site ID is 2
Control word is preferred by default
Do send sequence numbers by default
Relay format is atm-aal5-sdu-vcc by default
Administrative state is enabled
Operational state is up
Operational MTU is 9180
Field Description
Route distinguisher configured for the VPWS instance
Maximum number of customer sites allowed in the L2VPN instance
Site name and site ID for each customer site in the VPWS instance
Status of the site. Yes designates a multihomed site. No designates
a site that is not multihomed.
Priority value for the VPWS instance for the multihomed site;
displayed only when the value for the Multi-homed field is Yes
Route targets configured for the VPWS instance
Layer 2 interface that is a member of the VPWS instance
Local customer site ID configured on the layer 2 interface
Remote customer site ID configured on the layer 2 interface
Administrative state of the connection, disabled or enabled
Operational state of the connection, up or down
Chapter 16: Monitoring VPWS
675

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.2.x

Table of Contents