Selecting A Storage Device And A Network Board - Novell NETWARE 6-DOCUMENTATION Manual

Editing the Properties of the Storage Adapter (If Required)

Selecting a Storage Device and a Network Board

42
NetWare 6 Overview and Installation Guide
The storage adapter must be installed and configured correctly. Properties
such as interrupt, port value, and slot must not conflict with any other device
in the computer. If you need specific storage adapter properties, contact the
storage adapter manufacturer.
To select a storage device and network board, you must
Select and configure the storage device
Select and configure the network board
Load a NetWare Loadable Module program (if required)
To add a driver, in the Options box select Modify. Select the driver field and
press Enter. Press Insert to select from a list of drivers provided with NetWare.
Press Insert again to install a driver from diskette.
To delete a driver, in the Options box select Modify. Select the driver field and
press Enter. Select the driver to delete and press Delete.
To modify a driver, in the Options box select Modify. Select the driver field
and press Enter. Select the driver to modify and press Enter. Select the
property to modify.