Copying/Printing
Selecting Media
Paper Specifications
Paper Storage
For reliable WorkCentre operation and good copy/print quality, Xerox
recommends that paper be stored:
on a flat surface.
in a closed container.
in a low humidity area.
tightly wrapped, if the ream is partially used.
NOTE: Paper affected by humidity, and curled paper can cause jams and
copy/print quality problems.
The Specifications Chart below gives you information about the types of
paper that can be used at the paper input area.
Paper Input
Paper Sizes
Paper Weights
Optimum
Range
Paper Capacities
Copy, letterhead, and
predrilled
Labels and
Transparencies *
Envelope
* Use labels and transparencies specifically designed for copiers (high
temperatures).
3 7/8 x 5 7/8 to 8 ½ x 14" (98 to 216 x
315/330 mm)
20 lb / 80 g/m²
14 – 34 lb
52 – 130 g/m²
20 lb / 80 g/m² - 250 sheets
Yes (1 at a time)
COM-10 (4.1 x 9.5" / 216 x 279mm)
Monarch (3.87 x 7.5" / 98.5 x 191 mm)
C5 (6.4 x 9.16" / 162 x 229mm)
DL (4.4 x 8.8" / 110 x 220mm)
Paper Tray
11