Replacing The Second Bias Transfer Roll - Xerox WorkCentre WC7530 User Manual

8. Support the new transfer belt cleaner with your left hand and slide it straight into the opening until it
stops.
9. Push the orange knob in, then turn it clockwise until snug.
10. Turn the orange lever to the left to lock the belt cleaner.
11. Close the printer front cover.

Replacing the Second Bias Transfer Roll

A message appears on the control panel when the second bias transfer roll must be replaced.
1. Remove paper from the left tray, then fold up the tray.
WorkCentre 7500 Series Multifunction Printer
Maintenance
175
User Guide