Read Receipts (Specifying Read Receipts); Split Send (Sending In Sections) - Xerox ApeosPort-III C7600 User Manual

5 Scan

Read Receipts (Specifying Read Receipts)

This feature allows you to receive read receipts from e-mail recipients when using the
[E-mail] feature. This feature is not available unless recipients support the MDN
feature.
Note
1
Select [Read Receipts].
2
Select [On].
Off
5
Select this item when you do not request read receipts.
On
Select this when you request read receipts.

Split Send (Sending in Sections)

When you use the [E-mail] feature and the size of the data to be attached is large, you
can split the data at page breaks or by a certain data size and then send the data.
For information about the Split Send setting, refer to "5 Tools" > "E-mail/Internet Fax Service Settings"
> "E-Mail Control" > "Split Send Method", "Maximum Data Size per E-mail", "Maximum Total Job
Size", and "Maximum Split Count" in the Administrator Guide.
Note
1
Select [Split Send].
2
Select any item.
Split by Page
The data is split at page breaks.
Split by Data Size
The data is split by a certain data size.
Note
260
• This feature is displayed only when [Tools] > [System Settings] > [E-mail/Internet Fax
Settings] > [E-Mail Control] > [Read Receipts] is set to [On].
• When multiple e-mails are sent using [Split Send], then a read receipt is requested for each
e-mail.
• Read receipts are returned to the address specified in [Reply To], or they are returned to the
address specified in [From] if [Reply To] is not set.
• This feature is only available when the recipient also sets to return read receipts.
• [Split Send] is available only when the [File Format] is set to [PDF], [DocuWorks], or [XPS].
• Select this option if your e-mail application supports message/partial.