Defining Lldp Port Settings - Dell 5324 - PowerConnect Switch User Manual Addendum

Defining LLDP Port Settings

The LLDP Port Settings page allows network administrators to define LLDP port settings, including the port
number, the LLDP port number, and the type of port information advertised.
The Port Settings page contains fields for configuring LLDP. To open the Port Settings page, click Security
→
LLDP Port Settings in the tree view.
Figure 1-2. Port Settings
Port — Contains a list of ports on which LLDP is enabled.
State — Indicates the port type on which LLDP is enabled. The possible field values are:
Tx Only — Enables transmitting LLDP packets only.
Rx Only — Enables receiving LLDP packets only.
Tx & Rx — Enables transmitting and receiving LLDP packets. This is the default value.
Disable — Indicates that LLDP is disabled on the port.
Use Default — Indicates that information included in the TLVs is per the device defaults. The possible field
values are:
Checked — Enables sending the device default LLDP advertisements.
Unchecked — Indicates that the device LLDP advertisement settings are disabled, and LLDP
advertisement settings are user defined. This is the default value.
6
→