The following is an example of the CLI commands:
console (config)# snmp-server user John user-group auth-md5 1234
console (config)# end
console (config)# show snmp users
Name
-------
John
Defining Communities
Access rights are managed by defining communities in the Community Table. When the community
names are changed, access rights are also changed. To open the SNMP Community page, click System →
SNMP → Community in the tree view.
Figure 6-92. SNMP Community
•
SNMP Management Station — A list of management station IP addresses.
•
Community String — Functions as a password and used to authenticate the selected management
station to the device.
Group Name
Auth Method
----------
-----------
user-group
md5
Remote
------
Configuring System Information
207