Arp Settings - Dell PowerConnect 5316M User Manual

Figure 6-44. ARP Settings
Global Settings — Select this option to activate the fields for ARP global settings.
ARP Entry Age Out (1-40000000) — For all Ethernet switch module s, the amount of time
(seconds) that passes between ARP requests about an ARP table entry. After this period, the entry
is deleted from the table. The range is 1 - 40000000. The default value is 60000 seconds.
Clear ARP Table Entries — The type of ARP entries that are cleared on all Ethernet switch
modules. The possible values are:
None — ARP entries are not cleared.
All — All ARP entries are cleared.
Dynamic — Only dynamic ARP entries are cleared.
Static — Only static ARP entries are cleared.
ARP Entry — Select this option to activate the fields for ARP settings on a single Ethernet switch
module.
Interface — The interface number of the port, LAG, or VLAN that is connected to the Ethernet
switch module.
IP Address — The station IP address, which is associated with the MAC address filled in below.
MAC Address — The station MAC address, which is associated in the ARP table with the IP
address.
Status — The ARP Table entry status. Possible field values are:
116
Configuring System Information