ITech IT6600C Series User Manual page 63

3. Set the charging parameters for the battery and press the [Save] button to
save.
4. Press [On/Off] on the front panel, turn on the output.
5. Press [Run] in the Battery function interface.
6. Press [Shift]+[5](Trigger) on the front panel to run the battery charging
test.
7. Click [Stop] to stop the present running.
Battery Discharging Function
1. Click BAT on the Menu screen to enter the battery charging/discharging
function interface.
2. Press the up/down key to move the cursor to the Mode function setting
and press the [Enter] key to confirm. Rotate the knob to select Discharge
and press the [Enter] key to confirm.
Parameter Description
Mode Select mode: Charge (battery charge mode),
Discharge (battery discharge mode).
Charge Voltage Set the voltage value for charging.
Charge Current Set the current value for charging.
Charge Time Set the time value for charging.
Cut-Off Voltage Battery test cut-off voltage.
Cut-Off Current Battery test cut-off current.
Cut-Off Capacity Battery test cut-off capacity.
Cut-Off Energy Battery test cut-off energy.
Run Time Display the running time of the battery test.
Run/Stop Run/stop the Battery function.
Open Select the Battery file to execute.
Save Save the Battery file.
Copyright ©ITECH Electronic Co., Ltd.
Power Supply Function
54