ITech IT6600C Series User Manual page 196

4.
5.
6.
7.
RS-232 Troubleshooting
If you meet some problems when communicating with PC by RS-232 interface,
please check the following items:



Press the composite keys [Shift] + [P-set] (System) on the front panel to en-
ter the system menu.
Select Communication and press [Enter].
Select RS232 and press [Enter].
Set the relevant communication parameters in turn, and press [Enter].
Check that whether the baud rate of the computer and instrument are the
same;
Make sure the correct cable and adapter are connected. Note that internal
wiring may not be correct even if the cable has a suitable plug;
The cable must be connected to the correct serial ports (COM1, COM2, etc)
of PC.
Copyright ©ITECH Electronic Co., Ltd.
Remote Control
187