ITech IT6600C Series User Manual page 56

List parameters description：
Parameter Description
Description Description of List, display list file name.
Edit the attribute parameters of List file.
Priority Mode List running priority mode.
Repeat Edit the cycles of the List file. You can choose
Infinite and Count, when you choose Count, you
also need to set the total number of loops, set the
range: 1-9999999.
Trig out Function switch that triggers the signal output.


Slew Mode Select the slew unit.


End Mode Set the final waveform, with the following options
available:



Trig Source Select the trigger source for running this list file.




Copyright ©ITECH Electronic Co., Ltd.
Off: Turn off.
On: Turn on.When IO-4 is configured as
Trigger-out, a pulse signal will be output from
IO-4 when triggering the List function.
Time: describe the slew of the device in terms
of time.
Standard: standard slew, unit is V/ms or A/ms.
Off: directly off the output after operation.
Normal: return to normal after operation.
Last: keep the last
unchanged after operation.
Immediate: Perform a
immediately.
Manual: Indicates the trigger occurs when the
[Shift]+[5](Trigger) keys are pressed from the
front panel.
Bus: Bus trigger. When the trigger command
*TRG is received, the instrument generates a
trigger.
External: Indicates the trigger occurs via the
pin 4 of the digital I/O interface (P-IO). For
details, see 5.9 Digital I/O
Power Supply Function
waveform output
trigger operation
Function.
47