ITech IT6600C Series User Manual page 16

Keys Description
Power Power Switch
Print Used for saving screen images.
View Interface display switch key.


Menu Used for going back to menu page.
[Channel] Switch channels.
[V-set] Set the output voltage value.
[I-set] Set the output current value.
[P-set] Set the output power value.
[Recall]
Returns the instrument to the specified setup.
[Shift] Composite key, combined with other keys to realize
functions marked above keys.
[Esc]
Press this key to exit the current operation interface.
CH1 Turn the CH1 output on or off.
On/Off
CH2 Turn the CH2 output on or off.
On/Off
[0]-[9]
Number key. Enter the number directly.
+/-
Positive and negative signs.
.
Decimal point.
Left / Right The left and right navigation keys are used to adjust the
cursor to the specified position or scrolls pages to view
Navigation keys
menu items.
Up / Down The up and down navigation keys are used to scroll
page up and down to view menu items.
Navigation keys
[Enter] Operation confirmation key
Composite key [Shift], combined with other keys to realize functions marked
above keys. Firstly, press [shift] and the shift key will be lighted, and then press
the function key, the detailed functions are listed as follows.
Keys
[Shift]+[V-set] (Config)
[Shift]+[I-set] (List)
[Shift]+[P-set] (System)
Copyright ©ITECH Electronic Co., Ltd.
In Normal working mode, use this key to switch
between the Meter interface, Scope interface, and
Recorder interface.
In non-Normal working mode, use this key to switch
between the function interface, Scope interface,
and Recorder interface.
Description
Enter to Configuration menu.
Enter the List function menu.
Enter the System menu.
Quick Reference
7