ITech IT6600C Series User Manual page 132

4.8.1 IEC 61000-4-17
Interface Instruction
1. CH1 status bar: displays the output status of power channel 1.
2. CH2 status bar: displays the output status of power channel 2.
3. CH1/CH2: channel selection, Channel 1 or Channel 2.
4. Standards: the current supporting regulation is IEC 61000-4-17/4-29.
5. Display area: this area mainly displays the edited IEC, you can view this
IEC by sliding up and down.
6. Output values view area: displays the output voltage value, output current
value and output power value of the current channel.
7. Setting values view area (Normal mode): When CV is prioritized, the voltage
setting value, current upper limit value, current lower limit value, power
upper limit value, and power lower limit value are displayed. When CC is
prioritized, the current setting value, voltage upper limit value, voltage lower
limit value, power upper limit value, and power lower limit value are
displayed.
8. IEC edit button. The functions are described as follows.



9. Displays the IEC function relevant parameters, which can be viewed by
sliding up and down.
Edit IEC files
1. Click IEC on the Menu screen to enter the regulation test screen.
2. Click the [Edit] key on the screen and enter to the IEC file edit interface.
Run/Stop: run/stop the IEC function.
Open: select the IEC file to execute.
Edit: edit present IEC file.
Copyright ©ITECH Electronic Co., Ltd.
Power Supply Function
123