ITech IT6600C Series User Manual page 60

Value Unit
Slope Unit
Time Unit
Mode
Step Count
Repeat
End State
Step Index
value
slope
Keep Time

Sine: Sine wave
The fields included in the .csv template file are explained as follows:
Model
Firmware Version
Serial Number
File Type
Waveform Type
Amp Unit
Offset Unit
Frequency Unit
Mode
Repeat
Amp
Offset
Frequency
End State

Sweep: Sweep wave
The fields included in the .csv template file are explained as follows:
Model
Firmware Version
Serial Number
Copyright ©ITECH Electronic Co., Ltd.
modification.
The CV priority is set to V, and the CC priority is set
to A.
Slope unit, fixed to S.
Time unit, fixed to S.
Indicates the power supply working mode. The CV
priority is set to CV, and the CC priority is set to CC.
The total number of steps, up to 10 million points can
be edited.
Repeat times, the setting range is 1~65535.
Indicates the end state. Last (the voltage or current
maintained at the last step after the end) or Normal
(return to the normal mode before the List is
executed after the end).
The sequence number of the single step.
Voltage or current value for a single step.
Slope for a single step.
Pulse width for a single step.
Device model, keep the default settings without
modification.
Firmware version number, keep the default settings
without modification.
Device serial number, keep the default settings
without modification.
File type, keep the default settings without
modification.
Waveform type, keep the default settings without
modification.
Peak-to-peak unit, CV priority is set to V, CC priority
is set to A.
Offset value unit, CV priority is set to V, CC priority
is set to A.
Frequency unit, Hz.
Indicates the power supply working mode. The CV
priority is set to CV, and the CC priority is set to CC.
Repeat times, the setting range is 1~65535.
Peak-to-peak
Offset value
Frequency value, the default maximum is 250Hz.
Indicates the end state. Last (the voltage or current
maintained at the last step after the end) or Normal
(returns to the normal mode before Sine is
executed).
Device model, keep the default settings without
modification.
Firmware version number, keep the default settings
without modification.
Device serial number, keep the default settings
Power Supply Function
51