ITech IT6600C Series User Manual page 137

Edit Static PV Curve
IT6600 series power supplies provide both Userdefined and Curve for the user
to edit PV curves.

Curve
You can edit the static PV curve and save it inside the instrument, the steps
to edit a static curve locally on the instrument are as follows:
1.
2.
Click SAS on the Menu screen to enter the SAS function main interface.
Press [Edit] and enter to the PV curve file edit interface.
PV edit description:
Parameter Description
Description Display PV curve file name.
Mode Select the PV curve working mode User-defined or
Curve.
Regulation There are two regulation items for setting:

EN50530

SANDIA
Material Set solar panel material. Materials are different
under different regulation item.
EN50530

TF: Thin-Film

CSi
SANDIA

TF: Thin-Film

SCMC: Standard Crystalline or Multi-crystalline

HEC:High Efficiency Crystalline
Vmp Voltage of maximum power.
Pmp Maximum power
Save Save the PV curve file.
Download Download the SAS configuration to make it effective.
Copyright ©ITECH Electronic Co., Ltd.
Power Supply Function
128