ITech IT6600C Series User Manual page 138

Parameter
More
3. Fill in corresponding parameter in the PV edit interface. Click [More]
enter to advanced menu of PV file.
4. Press [Esc] to return Edit interface, Press [Save].
5. Press [Esc] to return and the interface appears with the edited PV
curve.

Userdefined
You can customize the editing of the PV curve. The steps to edit a custom
curve are as follows:
1. Click SAS on the Menu screen to enter the SAS function main interface.
2. Press [Edit] and enter to the PV curve file edit interface.
PV edit description:
Parameter
Description
Mode
Voc
Vmp
Isc
Imp
Save
Download
Copyright ©ITECH Electronic Co., Ltd.
Description

Filter: Filter the voltage collected from the
output terminals of this instrument to reduce
interference factors. Low(Low Speed Filtering),
Mmedium(Medium Speed Filtering), High(High
Speed Filtering).

Priority: Sets the output priority mode, CC or
CV.

Sas Speed: When CC is prioritized, the current
loop speed is set; when CV is prioritized, the
voltage loop speed is set.
Description
Display PV curve file name.
Select the PV curve working mode User-defined or
Curve.
Open-circuit voltage value.
Maximum power voltage value.
Short-circuit current value.
Maximum power current value.
Save the PV curve file.
Download the SAS configuration to make it effective.
Power Supply Function
129