ITech IT6600C Series User Manual page 58

4.
5.
6.

Export List file
After editing the List file, the user can directly save it into the device or export
and save it into the peripheral memory disc. The exported List is saved in
the format of. (*.csv). Detailed operation steps are as below:
1.
2.
3.
4.
5.
4.4.1 ARB Function
This series of instruments comes standard with ARB (arbitrary waveform)
function, which allows the output of user-defined arbitrary complex voltage or
current waveforms. It can be operated in the following ways:

The list files for dual-channel output mode and parallel output mode
need to be placed in the listParallel folder of the USB flash drive.

The list file for serial output mode needs to be placed in the
listSeries folder on the USB flash drive.
Insert the USB disk into the USB interface of the front panel. Press
[Shift]+[I-set](List) on the front panel to enter the List function main
interface.
Click the [Open] key on the screen, enter to list recall interface.
Click usb, select the 5.csv file in the usb, and click [Open] to confirm.
The list file will be imported and the configured 5.csv file will appear in
the interface.
Insert the U disk into the USB interface of the front panel. (The USB
type needs to be set as Host.)
Press [Shift]+[I-set](List) on the front panel to enter the List function
main interface.
Click the [Edit] key on the screen, enter to list file edit interface.
Click the [Save] key to enter the list save interface.
Click usb, set the FileName of the exported file, and click [Save] to
confirm the export. Then you can export the list file from Edit interface
to USB disk.
Copyright ©ITECH Electronic Co., Ltd.
Power Supply Function
49