ITech IT6600C Series User Manual page 33

a four-leg hoisting belt structure for horizontal hoisting and moving,
and ensure that the four hoisting belts are the same length to avoid
cabinet skew during movement. As shown below.

After moving to the destination, please lock the four casters to se- cure
the cabinet.

The cabinet should be placed on a level ground. It is forbidden to place
the cabinet on a sloped ground.
2.2 Verifying the Shipment
Open the package and check the articles within package box before operation.
In case of any non-conformity, missing or appearance wearing, please contact
ITECH immediately.
The package box should comprise:
Device name
High-power DC
Power Supply
Power Cord
USB
communication
cable
LAN
communication
Quantity Model
IT6600
x1
series
-
-
x1 -
x1 -
Copyright ©ITECH Electronic Co., Ltd.
Inspection and Installation
Remarks
For the specific models included in
this series, refer to 1.2 Models and
Options.
The 3U and 15U models come
standard with 1 power cord, and
the 27U and 37U models come
standard with 2 sets of power
cords.
This is used when the USB
interface is used for starting up
remote operation.
This is used when the LAN
interface is used for starting up
24