ITech IT6600C Series User Manual page 23

Char
Menu Introduction
Press the [Menu] key on the front panel and enter to the menu interface. Menu
interface will display all of function icon, user can rotate the knob or direction key
to select, or click the screen to enter the function interface.
Function description
LIST function is waiting
for trigger.
BAT is finished.
BSIM is running.
BSIM function is waiting
for trigger.
DLOG is finished.
ELOG is running.
ELOG function is
waiting for trigger.
Vehicle is running.
Standard is running.
Only load mode.
SYNC lock
Fiber is error.
Over current protection.
Over voltage protection.
Sense Error.
Under voltage
protection.
Tip image is folded,
click to expand all
icons.
Device calibration
modes.
Copyright ©ITECH Electronic Co., Ltd.
Char Function description
BAT is running.
BAT function is waiting
for trigger.
BSIM is finished.
DLOG is running.
DLOG function is
waiting for trigger.
ELOG is finished.
Vehicle function is
waiting for trigger.
Vehicle is finished.
Battery simulation
mode. (under only load
mode)
Touch function is
disabled.
SYNC unlock
Output is disabled.
Over temperature
protection.
Over power protection.
Under current
protection.
Communication
command error.
Analogue Function
Data recording function.
Quick Reference
14