ITech IT6600C Series User Manual page 191

8.2.3 Using Sockets


ITECH instruments have SCPI socket services, which can be used to send and
receive SCPI commands, queries, and query responses. All commands must be
terminated with a newline for the message to be parsed. All query responses will
also be terminated with a newline.
8.2.4 Using VNC
VNC (Virtual Network Computing) is a method of controlling a machine from a
remote desktop. Before using VNC, make sure to connect the machine and
computer using a LAN connection and configure the machine's IP address to
ensure they are on the same LAN.
Using the Browser
Enter the IP address of the machine + port number in the address bar of your
browser and press enter to connect to the machine. Note that the port number
must be 5800. The opened page is displayed as follows:
Using the VNC Client
1.
2.
Before using this function, you need to configure Socket Port, and
the configuration on the instrument side should be consistent with
the configuration on the PC side.
The instruments allow any combination of up to six simultaneous
socket and telnet connections to be made.
Double-click the VNC client software.
In the software that opens, enter the IP address of the machine in the edit
Copyright ©ITECH Electronic Co., Ltd.
Remote Control
182