Ip Interface Commands; Table 4-72 Basic Ip Configuration Commands - SMC Networks 8708L2 - annexe 1 Management Manual

C L
OMMAND INE
Example
The following shows that port 11 in VLAN 1 is attached to a multicast
router:
Console#show ip igmp snooping mrouter vlan 1
VLAN M'cast Router Ports Type
---- ------------------- -------
1
Console#

IP Interface Commands

An IP addresses may be used for management access to the switch over
your network. The IP address for this switch is obtained via DHCP by
default. You can manually configure a specific IP address, or direct the
device to obtain an address from a BOOTP or DHCP server when it is
powered on. You may also need to a establish a default gateway between
this device and management stations or other devices that exist on another
network segment.
Basic IP Configuration
Command
ip address
ip default-gateway Defines the default gateway through which an
ip dhcp restart
show ip interface Displays the IP settings for this device
show ip redirects
ping
4-278
I
NTERFACE
Eth 1/11

Table 4-72 Basic IP Configuration Commands

Function
Sets the IP address for the current interface
in-band management station can reach this
device
Submits a BOOTP or DCHP client request
Displays the default gateway configured for
this device
Sends ICMP echo request packets to another
node on the network
Static
Mode Page
IC 4-279
GC 4-280
PE 4-281
PE 4-282
PE 4-282
NE, 4-283
PE