All Modules - Cisco VS-C6509E-S720-10G User Manual

Chapter 8 Alarms and Alarm Management

All Modules

Table 8-6
Table 8-6
State
mismatched
normal
normallostcomms
performance
perflostcomms
Interfaces
Table 8-7
Table 8-7
State
normal
normallostcomms
performance
perflostcomms
Note Because an Ethernet Interface object cannot enter the lostcomms state independent of the corresponding
Ethernet module or supervisor engine module, no alarm is raised when the Ethernet Interface object
enters the lostcomms state.
describes all Module objects' state alarms.
All Modules State Alarms
Description
"C6576M Module is in the mismatched
state. The discovered Supervisor
Module type is different from the
pre-deployed or previously discovered
type."
"C6576M Module is in the normal
state."
"C6576M Module is in the lostcomms
state. Network connectivity to the
supervisor card is lost."
"C6576M Module is in the
performance state."
"C6576M Module is in the lostcomms
state. Network connectivity to the
supervisor card is lost."
describes the Interface objects state alarms.
Interface State Alarms
Description
"C6576M Interface is in the normal state."
"C6576M Interface is in the lostcomms state.
Network connectivity to the supervisor card is
lost."
"C6576M Interface is in the performance
state."
"C6576M Interface is in the lostcomms state.
Network connectivity to the supervisor card is
lost."
Severity Alarms Cleared
Major performance
lostcomms
Normal performance
lostcomms
Normal performance
lostcomms
Severity
Normal
Normal
Cisco 6500/7600 Series Manager User Guide
C65/76M Alarms
Alarms Cleared
performance
performance
8-11