Interfaces Tab - Cisco VS-C6509E-S720-10G User Manual

C6576M IS-IS Dialog Box
•
•
Network Area
The Network area of the C6576M IS-IS dialog box provides the following information:
•
Edit Network Table Subarea
This subarea allows you to modify the Network Table. The Add and Remove buttons adds a NET address
and removes a NET address from the IS-IS routing process, respectively. The following parameters must
be specified.
•
•
•
Status Field
The Status display-only field located at the bottom of the window indicates the current state of the
object. This field has the following values:
•
•
•

Interfaces Tab

Figure 6-80
Cisco 6500/7600 Series Manager User Guide
6-102
Add New IS-IS button—Creates an IS-IS routing process on the managed device.
Remove IS-IS button—Deletes the currently selected IS-IS object.
Network Table—Describes the Network Entity Titles for an IS-IS routing process. The NETs define
the area addresses for the IS-IS area and the system ID of the router. There must be at least one entry
in this table in order for the IS-IS routing process to be functional. This table displays the following
columns:
– AFI—Authority and Format Identifier (AFI). This is the first byte in the IS-IS NSAP Area
Identifier.
– Area Address—Area Address of the NET. Identifies the IS-IS routing area that the routing
process participates in.
– System-ID—System ID of the NET. Unique identifier of the device in the routing area.
– N-Selector—n-selector portion of the NET. Occupies the last byte of NET. Value is always 00.
AFI
Area Address
System ID
decommissioned—CEMF is not actively monitoring the object attributes.
normal—Presence polling of the object.
normallostcomms—CEMF has lost communication with the device from the normal state.
shows the Interfaces tab of the C6576M IS-IS dialog box.
Chapter 6 Logical Object Dialog Boxes