Cisco VS-C6509E-S720-10G User Manual page 70

Chapter 4 Deploying the C65/76M
Deployment and Commissioning Process
Figure 4-16 Manually Deployed and Commissioned Catalyst 6506 Switch
If an error is encountered when the object is commissioned, the Network Element object might go into
the Mismatched or Lostcomms state and an alarm would be raised.
The Network Element is placed in the Mismatched state if the IP address specified during the
deployment wizard does not correspond to the device type that was deployed. If this occurs, the Network
Element object must be deleted from CEMF and redeployed with the correct IP address or type.
The Network Element is placed in the Lostcomms state if the SNMP read community string specified in
during the deployment wizard is incorrect. If this occurs, open the Network Element dialog box,
decommission the Network Element object, go to the SNMP tab (Figure 4-6) and enter the correct SNMP
read community, and then recommission the Network Element object.
Cisco 6500/7600 Series Manager User Guide
4-20