Cisco VS-C6509E-S720-10G User Manual page 386

C6576M EIGRP Dialog Box
•
•
•
•
•
•
•
Metric Default Area
•
Cisco 6500/7600 Series Manager User Guide
6-96
Source ID—Identifies the routing process from which routes are being distributed. This field may
have the following values:
– IS-IS—This is either an implicit null tag or the tag of a named IS-IS routing process.
– EIGRP—This is a 16-bit autonomous system ID in the range of 1..65535
– BGP—This is a 16-bit autonomous system ID in the range of 1..65535
– OSPF—This is a 16-bit OSPF process ID in the range of 1..65535
IS-IS Routing Level—Indicates IS-IS route level redistribution. This field has the following values:
none—For protocols other than IS-IS.
–
level-1—Local area/intra-area dedistribution.
–
level-1-2—Redistribution for both inter- and intra-area routing.
–
– level-2—Backbone/interarea redistribution (default).
Bandwidth—Bandwidth metric. This redistribution metric must be specified for protocols other
than EIGRP if the Default Metric in the Details tab is nil.
Delay—Delay metric. This redistribution metric must be specified if the Default Metric is nil.
Reliability—Reliability metric. 0 is least reliable, 255 is 100 percent reiliable. This redistribution
metric must be specified if the default metric is nil.
Loading—Loading metric. This indicates the effective bandwidth of the network paths where 0 is
least loaded and 255 is 100 percent loaded. This redistribution metric must be specified if the
Default Metric is nil.
MTU—Maximum transmission unit of the path metric. This redistribution metric must be specified
if the Default Metric is nil.
Default Metric—Default metric used for route redistribution. This metric is used when and explicit
metric is not given during route redistribution process.
Chapter 6 Logical Object Dialog Boxes