Configuration Tab - Cisco VS-C6509E-S720-10G User Manual

C6576M EtherChannel Dialog Box

Configuration Tab

Figure 6-45
Figure 6-45 Configuration Tab of the C6576M EtherChannel Dialog Box
General Area
The General area provides the following information:
•
•
•
Note The Bandwidth attribute is an informational parameter used only to communicate the current bandwidth
to the higher-level protocols (such as IGRP, EIGRP and OSPF); you cannot adjust the actual bandwidth
of an interface with this command.
•
Note The Delay attribute is an informational parameter used only to communicate the current bandwidth to
the higher-level protocols (such as IGRP, EIGRP); you cannot adjust the actual delay of an interface with
this command.
Cisco 6500/7600 Series Manager User Guide
6-54
shows the Configuration tab of the C6576M EtherChannel dialog box.
Interface Mode—The current operational mode of the interface. This field has the following
values:
– switchport—Layer 2.
– routed—Layer 3.
Speed—The transmission speed in bits per second of the EtherChannel interface.
Bandwidth—Overwrites default bandwidth in kilobits per second.
Delay—Specifies the delay in tens of microseconds for an interface or network segment.
Chapter 6 Logical Object Dialog Boxes