Cisco VS-C6509E-S720-10G User Manual page 189

Chapter 5 Physical Object Dialog Boxes
Virtual Server Area
The Virtual Server area of the C6576M SLB dialog box allows the user to configure a virtual server to
bring it into service.
To modify attribute values, enter the desired value into the fields and press the Save icon in order for
Note
changes to take effect. Click Refresh to display the new settings.
The following information is provided:
•
Note This attribute cannot be nil if the virtual server IP address is set to a value other than 0.0.0.0. If virtual
server IP address is set to 0.0.0.0, it indicates that no IP address has been configured and the value of
the TCP port number is not applicable. On read, a value of 0 will always be returned.
Virtual Server Table—Describes the virtual servers. The following attributes are displayed for the
selected virtual server in the table:
Virtual Server Index—Unique identifier of a virtual server on the device.
–
IP Address—IP address of the virtual server. A value of 0.0.0.0 indicates that no IP address is
–
configured.
TCP Port—TCP port of the virtual server. A value of 0 indicates all ports are supported. Well
–
known port numbers include:
dns (53)
•
ftp (21)
•
• https (443)
• matip-a (350)
• nntp (119)
• pop2 (109)
• pop3 (110)
smtp (25)
•
telnet (23)
•
www (80)
•
• xot (1998)
Server Farm Name—Identifies the server farm associated with the virtual server. This
–
referenced server farm must be unique on the device.
Idle Timer—The duration that connection information is maintained in the absence of packet
–
activity for a connection.
– Current Connections—Number of current connections to the virtual server.
– Operation Status—The operational status of the virtual server. This attribute can have the
following values:
• outOfService (1)
• operational (2)
• failed (3)
C6576M SLB Dialog Box
Cisco 6500/7600 Series Manager User Guide
5-75