Cisco VS-C6509E-S720-10G User Manual page 240

C6576M OSM GE-WAN Interface Dialog Box
•
Figure 5-64 HSRP Group Configure Subdialog Box
Secondary IP Area
The Secondary IP area of the C6576M OSM GE-WAN Interface dialog box provides the following
information:
•
Cisco 6500/7600 Series Manager User Guide
5-126
Configure button—Enables HSRP for IP on an interface.
displayed when you click the Configure button. The following is displayed in the subdialog box:
– Group Number—Unique identifier of an HSRP group.
– IP Address—The HSRP group may optionally be assigned a primary IP address. If no address
is explicitly assigned, the device attempts to discover the virtual IP address from the active
server using hello messages.
Add button—Adds an HSRP group on the interface.
–
– Remove button—Removes an HSRP group on the interface.
HSRP Secondary Address Table—Describes secondary IP addresses of HSRP groups deployed on
the interface. Data is displayed in the following columns:
– Group Number—Unique identifier of an HSRP group.
– Secondary IP—Secondary IP address of HSRP group.
Chapter 5 Physical Object Dialog Boxes
Figure 5-64 shows the subdialog box