Chapter 5
Physical Object Dialog Boxes
C6576M Supervisor Module Dialog Box
This dialog box provides access to attributes of the supervisor engine modules. This dialog box can be
launched from a Chassis object or Supervisor Module object within the Physical view.
You can select one chassis and more than one supervisor engine module at a time from the object list on
the left side of the dialog box.
Status Tab
Figure 5-7
Figure 5-7
Status Area
The Status area of the C6576M Supervisor Module dialog box provides the following information:
•
shows the Status tab of the C6576M Supervisor Module dialog box.
Status Tab of the C6576M Supervisor Module Dialog Box
Operational Status—Displays the operational status of the supervisor engine module. The operation
status can have one of the following values:
–
other—The status is unknown.
–
ok—The status is normal.
minorFault—There is a minor fault.
–
majorFault—There is a major fault.
–
C6576M Supervisor Module Dialog Box
Cisco 6500/7600 Series Manager User Guide
5-15