Cisco VS-C6509E-S720-10G User Manual page 46

Deploying C65/76M Objects
Table 3-2
Property
Catalyst 6500 Switch
Name
Supervisor IP Address
CatOS/IOS SNMP V1
Read Community
CatOS/IOS SNMP V1
Write Community
CatOS/IOS SNMP V2c
Read Community
CatOS/IOS SNMP V2c
Write Community
CatOS/IOS SNMP
Version
CatOS/IOS Username
CatOS/IOS Password
OS Deploy Type
Cisco 6500/7600 Series Manager User Guide
3-8
Object Parameter Definitions
Description
Name of the Network Element object that will be
displayed in the Map Viewer application.
IP address of the switch supervisor engine.
SNMP v1 read community used by the device.
This deployment mode assumes the same
communities for either switch operating system.
SNMP v1 write community used by the device.
This deployment mode assumes the same
communities for either switch operating system.
SNMP v2c read community used by the device.
This deployment mode assumes the same
communities for either switch operating system.
SNMP v2c write community used by the device.
This deployment mode assumes the same
communities for either switch operating system.
The version of the SNMP agent running on the
device. This is a drop-down menu containing:
SNMPv1
•
• SNMPv2c
The username used to allow the C65/76M to
access the Network Element device using a Telnet
connection. This deployment mode assumes the
same username for either switch operating system.
The password used to allow the C65/76M to
access the Network Element using a Telnet
connection. The value entered in this text box will
not be in plain text. This deployment mode
assumes the same password for either switch
operating system.
If the specific OS installation type for the switch
is known, it can be selected here. Leave the setting
as autoDetect to let the EMS determine the OS
deployment type.
Chapter 3 Getting Started