Cisco VS-C6509E-S720-10G User Manual page 168

C6576M FlexWAN Module Dialog Box
Inventory Area
The Inventory area of the C6576M FlexWAN Module dialog box provides the following information.
All the attributes in this area are read-only.
•
•
•
•
•
Performance Logging Area
The Performance Logging area of the C6576M FlexWAN Module dialog box contains these buttons to
enable and disable performance logging of the interface attributes of the port adapters (if installed) on
the FlexWAN module:
•
•
The logged data is available to the user through the CEMF Performance Manager. Refer to the Cisco
Note
Element Management Framework User Guide for more information about the Performance Manager.
Actions Area
The Actions area of the C6576M FlexWAN Module dialog box provides the following actions:
•
•
Cisco 6500/7600 Series Manager User Guide
5-54
Model—Model of the FlexWAN module. This attribute has the following value:
WS-X6182-2PA
–
Serial Number—The serial number of the module.
Hardware Version—The hardware version on the module.
Software Version—The software version on the module.
Firmware Version—The firmware version on the module.
Start—Turns on performance data logging.
Stop—Turns off performance data logging.
Commission—This button is used to commission the object manually. This can only be done if the
object is in a decommissioned state.
Decommission—This button is used to decommission the object manually. In the decommissioned
state, the properties of the object are not monitored. As a result, data displayed in the configuration
window is not guaranteed to be current.
The decommission action allows a FlexWAN module to be removed and replaced without
generating alarms.
Chapter 5 Physical Object Dialog Boxes