Cisco VS-C6509E-S720-10G User Manual page 181

Chapter 5 Physical Object Dialog Boxes
Note The configured SLB mode does not take effect until the Content Switching Module is reloaded. The
reload is performed manually by executing the IOS config mode command power cycle module
slot_number.
Note When changing the configured SLB mode from CSM to RP, the SLB configurations for CSM will be
erased.
Actions Area
The Actions area of the C6576M SLB dialog box provides the following actions:
•
•
Status Field
The display-only Status field located at the bottom of the window indicates the current state of the
object. This field has the following values:
•
•
•
•
•
•
Commission—This button is used to commission the object manually. This can only be done if the
object is in a decommissioned state.
Decommission—This button is used to decommission the object manually. In the decommissioned
state, the properties of the object are not monitored. As a result, data displayed in the configuration
window is not guaranteed to be current.
The decommission action allows a Content Switching Module to be removed and replaced without
generating alarms.
decommissioned—CEMF is not actively monitoring the object attributes.
normal—Presence polling is performed periodically.
performance—Some attributes are collected periodically for trending purposes.
normallostcomms—CEMF has lost communication with the device from the normal state.
perflostcomms—CEMF has lost communication with the device from the performance state.
mismatched—The type of Content Switching Module discovered does not match the predeployed
Content Switching Module.
C6576M SLB Dialog Box
Cisco 6500/7600 Series Manager User Guide
5-67