Cisco VS-C6509E-S720-10G User Manual page 239

Chapter 5 Physical Object Dialog Boxes
Figure 5-63 HSRP Secondary IP Modify Subdialog Box
HSRP Area
The HSRP area of the C6576M OSM GE-WAN Interface dialog box provides the following information:
•
There may be multiple groups deployed on an interface. Using a group number on one logical or physical
Note
interface does not preclude using it on another.
•
•
•
•
•
•
HSRP Group Table—Describes HSRP groups deployed on an interface.
Virtual IP—Primary virtual IP address of the HSRP group. If this address is not configured, the
agent attempts to discover the virtual address through a discovery process which scans the hello
messages.
Preempt—If enabled, the current router attempts to overthrow a lower priority active router and
attempts to become the active router. If disabled, this router becomes the active router only if there
is no such router or the active router fails.
– true—Preempt enabled.
– false—Preempt disabled.
Delay Minimum—Time difference (in seconds) between a router power up and the time it can start
preempting the currently active router. This value is only applicable when preemption is enabled.
Priority—Metric used to select the active and standby routers. 0 is lowest priority, 255 is highest.
Router with highest priority is selected to be the active router.
Hello Interval—Hello interval in milliseconds. If this value is not configured, it can be learned from
the active router.
Hold Interval—Hold interval in milliseconds. If this value is not configured, it can be learned from
the active router.
C6576M OSM GE-WAN Interface Dialog Box
Cisco 6500/7600 Series Manager User Guide
5-125