Cisco VS-C6509E-S720-10G User Manual page 210

C6576M ATM E3 Interface Dialog Box
Interface Packets / Octets Statistics Area
The Interface Packets/Octets Statistics area contains the following information:
•
•
•
•
•
•
•
•
•
Interface Error Statistics Area
The Interface Error Statistics area contains the following information:
•
•
•
•
•
•
•
•
•
DX3 Current Area
The DX3 Current area contains the following information:
•
•
•
•
Cisco 6500/7600 Series Manager User Guide
5-96
Bandwidth Util (%)—Percentage of bandwidth utilization.
In Octets—Total number of received octets including framing characters.
Out Octets—Total number of transmitted octets including framing characters.
In Unicast Pkts.—The number of packets, delivered by this sublayer to a higher (sub-)layer, which
were not addressed to a multicast or broadcast address at this sublayer.
Out Unicast Pkts.—The total number of packets that higher-level protocols requested be
transmitted, and which were not addressed to a multicast or broadcast address at this sublayer,
including those that were discarded or not sent.
In Packets/Sec—Five-minute exponentially decayed moving average of input packets per second.
Out Packets/Sec—Five-minute exponentially decayed moving average of output packets per
second.
In Bits/Sec—Five-minute exponentially decayed moving average of input bits per second.
Out Bits/Sec—Five-minute exponentially decayed moving average of output bits per second.
CRC Error Pkts.—Number of input packets which had cyclic redundancy checksum errors.
In Discarded Pkts.—The number of inbound packets that were chosen to be discarded even though
no errors had been detected to prevent them from being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet is to free up buffer space.
Out Discarded Pkts.—The number of outbound packets which were chosen to be discarded even
though no errors had been detected to prevent their being transmitted. One possible reason for
discarding such a packet could be to free up buffer space.
In Dropped Pkts.—The number of packets dropped because the input queue was full.
Out Dropped Pkts.—The number of packets dropped because the output queue was full.
In Ignored Pkts.—Number of input packets that were simply ignored by this interface.
In Aborted Pkts.—Number of input packets that were aborted.
In Error Pkts.—The number of inbound packets that contained errors preventing them from being
delivered to a higher-layer protocol.
Out Error Pkts.—Number of outbound packets that could not be transmitted because of errors.
C-bit Errored Secs—C-bit errored seconds.
C-bit Severely Err Secs—C-bit severely errored seconds.
C-bit Coding Violations—C-bit coding violations.
P-bit Errored Secs—P-bit errored seconds.
Chapter 5 Physical Object Dialog Boxes