Redistribution Tab - Cisco VS-C6509E-S720-10G User Manual

C6576M IS-IS Dialog Box

Redistribution Tab

Figure 6-81
Figure 6-81 Redistribution Tab of C6576M IS-IS Dialog Box
Redistribution Table Area
The Redistribution Table area of the C6576M IS-IS dialog box describes the route redistribution
configuration of an IS-IS routing process.
•
•
•
Edit Redistribution Table Area
The Edit Redistribution Table area of the C6576M IS-IS dialog box allows you to enable or disable route
redistribution from another IP routing process into the IS-IS area. The following parameters must be
given:
•
•
•
Cisco 6500/7600 Series Manager User Guide
6-104
shows the Interfaces tab of the C6576M IS-IS dialog box.
Protocol—Source routing protocol from which routes are learned and redistributed into the IS-IS
area.
Source ID—This identifies the routing process.
BGP—An autonomous system number, which is a 16-bit decimal number.
–
– EIGRP—Same as BGP.
– OSPF—An appropriate OSPF process ID from which routes are to be redistributed. This value
takes the form of a non-zero decimal number.
Metric—IS-IS metric used for the redistributed route.
Protocol
Source ID
Metric
Chapter 6 Logical Object Dialog Boxes