Cisco VS-C6509E-S720-10G User Manual page 143

Chapter 5 Physical Object Dialog Boxes
•
•
•
Status Field
The display-only Status field located at the bottom of the window indicates that current state of the
object. This field can have the following values:
•
•
•
•
•
– down—The interface is in a down administrative status; this value causes the operational status
to be set to down as well.
– testing (read-only)—In this state, no operational packets can be transmitted or received. This
value is read-only.
Last Change—The timestamp indicating when the configuration for this interface was last changed.
This is a read-only attribute.
Connector Present—Displays if a cable is attached to the interface. These are the values:
– yes
– no
– unknown—This value is used when the Administrative Status is not set to "up". In this case, it
cannot be determined if a connection is present or not.
Number of Resets—The number of times this interface has been reset. This attribute is read-only.
decommissioned—CEMF is not actively monitoring the object attributes.
normal—Presence polling is performed periodically.
performance—Some attributes are collected periodically for trending purposes.
normallostcomms—CEMF has lost communication with the device from the normal state.
perflostcomms—CEMF has lost communication with the device from the performance state.
C6576M Ethernet Interface Dialog Box
Cisco 6500/7600 Series Manager User Guide
5-29