Membership Tab - Cisco VS-C6509E-S720-10G User Manual

C6576M EtherChannel Dialog Box

Membership Tab

Figure 6-46
Figure 6-46 Membership Tab of the C6576M EtherChannel Dialog Box
Global EtherChannel Ports Assignment Area
This area lists the EtherChannel assignments for all interfaces on the selected software (switch) instance
and is not specific to any EtherChannel instance. In native IOS, this can be used to add ports to an
EtherChannel instanceby setting the operational mode to "manual" or "auto" and specifying the channel
number. If the specified channel number does not exist, it will be immediately created on the switch. In
hybrid mode, this area assigns ports to channel admin groups, from which the switch will automatically
form active EtherChannel instances. The table contains the following information:
•
•
•
Cisco 6500/7600 Series Manager User Guide
6-56
shows the Membership tab of the C6576M EtherChannel dialog box.
Slot—Slot number of the interface.
Port—Port number of the interface.
Operation Mode—The operation mode of the interface in the admin group. This field has one of
the following values:
off—The interface does not belong to an admin group. Setting the value to this selection will
–
remove the interface from the current admin group. Note that removing the last interface from
an active EtherChannel instance on a hybrid switch will automatically delete the EtherChannel,
while in native IOS the EtherChannel will still need to be deleted using the Delete EtherChannel
button on the Status Tab.
– manual or auto—Indicates that the port is to belong to the admin group with the indicated PAgP
operational mode. Setting the value to this selection with an admin group specified will
immediately add the interface to the indicated EtherChannel in native IOS or to the admin group
(from which an EtherChannel may form) in hybrid OS.
Chapter 6 Logical Object Dialog Boxes