Distribution List Tab - Cisco VS-C6509E-S720-10G User Manual

Chapter 6 Logical Object Dialog Boxes
Edit Redistribution Table Area
This area allows changes to be made to the attributes shown in the Redistribution Table. These attributes
are discussed in detail in the
•
•
•
•
•
•
•
•
•
•

Distribution List Tab

Figure 6-77
"Redistribution Table Area" section on page
Protocol—Source routing protocol from which routes are being distributed into EIGRP. This field
may have the following values:
IS-IS
–
EIGRP
–
OSPF
–
BGP
–
– static
IS-IS Routing Level—Indicates IS-IS route level redistribution.
Delay—Delay metric.
Loading—Loading metric.
Source ID—Identifies the routing process from which routes are being distributed.
Bandwidth—Bandwidth metric.
Reliability—Reliability metric.
MTU—Maximum transmission unit of the path metric.
Add button—Enables route redistribution from another IP routing process into the EIGRP routing
domain. Routes may be learned from an IS-IS, OSPF, or BGP routing process.
Delete button—Disables route redistribution from another IP routing process into the EIGRP
routing domain.
shows the Distribution List tab of the C6576M EIGRP dialog box.
C6576M EIGRP Dialog Box
6-95.
Cisco 6500/7600 Series Manager User Guide
6-97