Profiles
This chapter describes how to create and use the C65/76M profiles, and consists of these sections:
•
•
Profiles are used to apply the same configuration settings to multiple instances of the same object. This
is useful in environments containing a large number of network elements.
Network Element Profile
The Network Element profile is used to set up a standard template for the Network Element object
attributes listed below. These attributes are discussed in detail in the
Box" section on page
•
•
•
•
•
Creating a Network Element Profile
To create a Network Element Profile, follow these steps:
Step 1
Launch the Network Element Profile dialog box by choosing Open NE Config/Mgmt Profile from the
pop-up menu of the Network Element object. The Network Element Profile dialog box is shown in
Figure
Network Element Profile, page 7-1
Syslog Profile, page 7-3
6-5.
System Location
System Contact
Telnet Password
Enable Password
SNMP Trap Enabled
7-1.
C H A P T E R
"C6576M Network Element Dialog
Cisco 6500/7600 Series Manager User Guide
7
7-1