Area Tab - Cisco VS-C6509E-S720-10G User Manual

C6576M OSPF Dialog Box
Status Field
The Status display-only field located at the bottom of the window indicates the current state of the
object. This field has the following values:
•
•
•

Area Tab

Figure 6-64
Figure 6-64 Area Tab of the C6576M OSPF Dialog Box
Area Configuration Area
This describes OSPF NSSA and stub area configurations. The information for a particular area can be
displayed by selecting the desired area from the Areas list. When you select an area, the following
information is provided:
•
•
Cisco 6500/7600 Series Manager User Guide
6-80
decommissioned—CEMF is not actively monitoring the object attributes.
normal—Presence polling of the object.
normallostcomms—CEMF has lost communication with the device from the normal state.
shows the Area tab of the C6576M OSPF dialog box.
Area ID—Identifies a stub or NSSA area adjacent to the router. The identifier can be specified as
either a decimal value or as an IP address.
Area Type—Type of area. The type has the following values:
default—Not a stub or NSSA area.
–
stub—Information on external routes are not sent to stub areas.
–
Chapter 6 Logical Object Dialog Boxes