Cisco VS-C6509E-S720-10G User Manual page 443

Chapter 8 Alarms and Alarm Management
Modules/Port Adapters
The following table describes the Module object attribute alarms.
Table 8-12
Attribute
Operational
Status = ok
Operational
Status = other
Operational
Status =
minorFault
Operational
Status =
majorFault
Serial Number
Port adapters do not support the operational status information, as a result the only attribute alarm raised
by a port adapter is the final one - a serial number change has been detected.
Module Attribute Alarms
Description
"C6576M Module Operational Status is
ok"
"C6576M Module Operational Status is
other"
"C6576M Module Operational Status is
minorFault."
"C6576M Module Operational Status is
majorFault."
"C6576M rModule Serial Number has
changed. The Module has been replaced
with a different card of the same type."
A change in this value indicates that the
Supervisor module was removed and
replaced with another of the same time.
Severity Alarms Cleared
Normal Operational Status =
other
Operational Status =
minorFault
Operational Status =
majorFault
Minor Operational Status =
minorFault
Operational Status =
majorFault
Major Operational Status =
other
Operational Status =
majorFault
Critical Operational Status =
other
Operational Status =
minorFault
Critical None
Cisco 6500/7600 Series Manager User Guide
C65/76M Alarms
8-15