Pos Statistics Tab - Cisco VS-C6509E-S720-10G User Manual

C6576M OSM POS Subinterface Dialog Box

POS Statistics Tab

Figure 5-91
Figure 5-91 POS Statistics Tab on the C6576M OSM POS Subinterface Dialog Box
SONET Path Error Area
The SONET Path Error area contains the following information:
•
•
•
•
Cisco 6500/7600 Series Manager User Guide
5-172
shows the POS Statistics tab of the C6576M OSM POS Subinterface dialog box.
SONET Path Status—Status of the SONET Path. This status may indicate multiple simultaneous
defects. These are possible path defects (bitmask):
No defects (1)
–
– STS-Path Loss of Pointer (2)
– STS-Path Alarm Indication Signal (4)
– STS-Path Remote Defect Indication (8)
– Unequipped (16)
– Signal Label Mismatch (32)
SONET Path Width—Width of the SONET path. This is described by the STS-Nc SPE. A DS3
channel has a width of STS-1 (55.84 Mbps).
Errored Secs—Number of errored seconds encountered by the SONET Path in the current 15-minute
interval.
Severely Err Secs—Number of severely errored seconds encountered by the SONET Path in the
current 15-minute interval.
Chapter 5 Physical Object Dialog Boxes