Cisco VS-C6509E-S720-10G User Manual page 264

C6576M OSM Serial Subinterface Dialog Box
Interface Status Area
The Status area of the C6576M OSM Serial Subinterface dialog box provides the following information
to describe the general characteristics of the interface:
•
•
•
•
•
•
•
Status Field
The display-only Status field located at the bottom of the window indicates the current state of the
object. This field has the following values:
•
•
•
•
•
Cisco 6500/7600 Series Manager User Guide
5-150
Description—Comment or a description to help you remember what is attached to this interface. The
description is put in the configuration to help you remember what specific interfaces are used for.
Index—String index of the interface. This attribute is read-only.
Operational Status—The current operational state of the interface. This attribute is read-only. This
attribute has one of the following values:
unknown
–
down
–
– up
dormant—Interface is waiting for external actions (such as a serial line waiting for an incoming
–
connection)
– notPresent—Interface has missing components (typically hardware).
– lowerLayerDown—Indicates that the primary channelized SONET interface has failed.
Administrative Status—The desired state of the interface. This attribute has one of the following
values:
– up
– down
Number of Resets—Number of times the interface internally reset. This attribute is read-only.
Connector Present—Displays if a cable is attached to the parent interface (the OSM Channelized
SONET Interface). These are the values:
yes
–
no
–
unknown—This value is used when the Administrative Status is not set to "up". In this case, it
–
cannot be determined if a connection is present or not.
Last Change—The value (in seconds) of sysUpTime at the time the interface entered its current
operational state. If the current state was entered before the last reinitialization of the local network
management subsystem, then this object contains a zero value. This attribute is read-only.
decommissioned—CEMF is not actively monitoring the object attributes.
normal—Presence polling is performed periodically.
performance—Some attributes are collected periodically for trending purposes.
normallostcomms—CEMF has lost communication with the device from the normal state.
perflostcomms—CEMF has lost communication with the device from the performance state.
Chapter 5 Physical Object Dialog Boxes